Swagelok experts work with leading industry trade publications, developing articles designed to provide you resources and knowledge on fluid systems. Browse our articles below and be sure to check out our blog, Swagelok Reference Point, as well as follow us on LinkedIn for similar content.
Browse our latest articles
Swagelok recently announced the release of the ALD7 ultrahigh-purity (UHP) diaphragm valve. Compared to Swagelok’s current top-of-the-line ALD6 valve, the ALD7 provides better flow consistency, flow capacity, and actuator speed.
Read more about the ALD7 valve in FluidHandlingMag.com; Gasworld.com; Valve-World.net; ValveWorld-Americas.com; Compoundsemiconductor.net; and more.
Swagelok Company is marking its 75th year in business by expanding its workforce on Cleveland’s west side through the addition of positions in its existing Strongsville facility and the purchase of an existing building in Valley City, Ohio.
Read more about the 75th anniversary in TankStorageNewsAmerica.com; USGasVehicles.com; Gasworld.com; SiliconSemiconductor.net; WorldOil.com; DigitalRefining.com; PowerMag.com and more.
Enhanced Safety in Oil & Gas Production with IOGP Small-Bore Tubing and Fittings Specification S-716
Originally published in Stainless Steel World | September 2022
Gary Matson shares why it’s important to adhere to the most up-to-date equipment regulations in the oil & gas industry.
Originally published in PowerMotionTech.com | September 2022
Randy Rieken explains that why leaks may range in severity, they can result in inefficiency and potential danger to the team and the environment.
Originally published in IEN.com | September 2022
Shaji Arumpanayil explains that while there is no way to eliminate SPE in gas systems, there are three ways to reduce it.
Originally published in Stainless Steel World Americas | August 2022
Michael Bestic explains why pitting and crevice corrosion can save downtime and money. Additionally, identifying the type of corrosion affecting a system is the first step to eliminating it in the future.
Originally published in Industriearmaturen & Dichtungstechnik | August 2022
Joe Bush shares the best fitting valve for any type of industrial application.
Originally published in Hydrocarbon Processing | August 2022
Many factors go into selecting the proper regulator for your system. Shaji Arumpanayil shares that one of those factors is sensitivity to changes in outlet pressure as downstream flow fluctuates, which is often characterized as “droop.”
Originally published in Oilgas | August 2022
Article about building safer and reliable seal auxiliary systems.
Originally published in Today Energy | May 2022
The KEV series regulators have earned multiple certifications including ATEX (Europe), IECEx (International), and CSA (Canada and USA), and its safety for critical and hazardous environments has been verified. The regulator has also received an explosion-proof certification KCs from the Korea Gas Safety Corporation and Type Examination Certificate from Eurofins E&E CML Limited in Japan. This press release provides details on the certification.
Also published in: Korea Gas Newspaper, Energy Daily, HelloT, Complete Automation Technology, Naver Blog of Complete Automation Technology, Yeogie by Complete Automation Technology.
Originally published in Fluid Handling Pro | June 2022
This article explains why it is important to understand when relief valves should be activated and where they should be used to maximize chemical plant safety.
Originally published in Eureka Flash Info | June 2022
Mechanical seals have long been the dominant sealing technology in chemical plants and refineries. Sean Hunsicker shares key best practices that can help your facility enhance the construction and design of your seal support systems so you can improve reliability and safety.
Originally published in Plant Engineering | May 2022
Swagelok won gold for its gas distribution system.
Originally published in Fluid Handling International | July 2022
Brian Van Valkenburg shares why working with a reliable, reputable supplier can give firms access to resources you may not have on your own.
Originally published in ControlEng.com | July 2022
Shaji Arumpanayil discusses how a three-step process can help operators recognize regulator problems and provide solutions before they affect the entire system.
Also published in PlantEngineering.com.
Originally published in Plant Services | July 2022
Matt Dixon explains that even though every fluid system is unique to a facility’s specific circumstances, there are some universal considerations that must be examined before a system is built to avoid issues in the future.
Originally published in IEN | April 2022
Brian Aplin explains why the right component supplier can help you design an efficient, effective tagging program.
Originally published in Valve World Americas | April 2022
Industrial fluid systems have dozens of valves that control the flow of critical fluids from one part of the system to another. Brian Aplin shares why mission-critical data on tags can help prevent significant downtime.
Also published in Hose & Coupling World.
Originally published in Power & Motion | April 2022
A variety of small-bore tube fittings are available for hydraulic and industrial fluid systems. Natalie Hagan explains why making the right choice based on system requirements is critical.
Originally published in Oil and Gas Engineering | April 2022
Floating production storage and offloading (FPSO) vessels deliver the same functionality as stationary oil & gas platforms while being able to relocate as economic headwinds or drilling opportunities change. As such, they’ve emerged as an efficient way to take advantage of oil fields across the globe. Tommy Jamail Jr. examines some of the complexities of commissioning these systems throughout the construction process.
Originally published in Advanced Clean Tech News | January 2022
As research into hydrogen fuel cell vehicles intensifies, it’s critical to acknowledge the challenge of developing safe, reliable fuel cells — a challenge presented by hydrogen itself. Chuck Hayes and Chuck Erml explain why the fittings in hydrogen applications, particularly those that connect the most critical parts of high-pressure hydrogen fuel systems, must be capable of delivering high levels of performance and reliability.
Swagelok Provides a Deep Dive into Hydrogen Fittings and Its Importance for the Mobility Sector During H2 View Webinar
Originally published in H2 View | March 2022
Chuck Hayes provides a deep dive into hydrogen fittings and its importance for the mobility sector.
Originally published in H2 Tech | March 2022
As part of the industry-wide drive to develop high-efficiency, low-emissions vehicles, manufacturers are investing significant revenue in H2 mobility and its related infrastructure. Chuck Hayes discusses how you can choose the most effective components for H2 fuel cell vehicles.
Originally published in P.I. Process Instrumentation | March 2022
Matt Dixon shares how third-party field engineers can help to uncover savings opportunities and achieve gas distribution goals through standardized, highly configurable gas delivery solutions.
Originally published in Stainless Steel World | March 2022
Thanks to the global pandemic and certain geopolitical tensions, we’re living in a very different world from three years ago. This article attempts to sketch these changes and the challenges they pose, as they affect the tubes, pipes and fittings industry.
Originally published in Process Control | February 2022
Though the topic of fugitive emissions is not a new one, it remains essential to understand how these unwanted leaks can affect the long-term profitability of your chemical processing and refining facilities. Chuck Erml explains how low-emission valves can streamline your facility’s operations.
Originally published in Plant Engineering | February 2022
Onsite visits play a key role in improving the safety, performance and reliability of fluid and sampling systems, but can be difficult to arrange such visits due to the cost of bringing an entire team onsite, as well as the additional time and effort required by facility leadership to lead the engineers through an evaluation. Stacey Phillips explains why a semi-virtual alternative to a traditional onsite visit offers great promise for the future.
Originally published in Manufacturing.net | February 28, 2022
The processing industry requires precise methods to ensure quality and consistency. The stakes have never been higher. Matt Dixon discusses how to enhance grab sampling system safety, in order to ensure accurate processing.
Originally published in CONTROL | January 2022
Each year, readers of CONTROL write in votes for their preferred suppliers in more than 80 process control and instrumentation technology categories. As a reliable and well-known supplier to the processing and control industries, Swagelok won the top slot in the 2022 Readers’ Choice Awards “Instrument Fittings” category.
Originally published in EEWorldOnline.com | January 2022
The semiconductor industry has learned to control for process challenges, often through advanced fluid system components and designs, which has positively affected results. Lawrence Crynes, Market Manager, Semiconductor for Swagelok Company, discusses why it’s important to understand the past, present and future of semiconductor manufacturing and what it means for the components that make it work.
Originally published in IEN | February 2, 2022
Choosing the proper components for your industrial fluid systems is critical to ensuring they function as intended; one of the most important components to consider are the valves, which give operators the ability to control system fluid flow in ways that are most appropriate for the application’s needs. Joe Bush shares the several different valves available to ensure proper selection for your fluid system.
Originally published in Processing Magazine | December 2021
Processing’s annual Breakthrough Products Awards honor innovative technology solutions that made significant contributions to improvements in the process industries within the last year. The Swagelok Gas Distribution Program was one of the 2021 award winners.
Originally published in FluidHandlingPro.com | December 2021
Industrial fluid system processes rely on precise fluid temperature, flow, and pressure settings to operate as intended. Many key components, including pressure regulators (or pressure-reducing valves), are critical in maintaining your necessary process conditions. This step-by-step guide troubleshoots some of the most common problems pressure regulators can experience.
Originally published in DesignNews.com | December 2021
Pressure regulators are used in a variety of industrial environments, so it is important to make sure they are working effectively. Dave Parkes discusses how the combination of engineering excellence and meticulous lab-based analysis could improve the chances that your regulators will perform as promised.
Originally published in Energy Management | Winter 2021
Fugitive emissions are an important topic for chemical processing and refining facilities, because they can negatively impact profitability and compliance with environmental regulations. Randy Rieken examines how low-emissions valves can help ensure regulatory compliance.
Originally published in P.I. Process Instrumentation | December 2021
Process analyzers are a significant monetary investment, but they have major potential to improve production outputs and reduce downtime. Karim Mahraz explores how process control, quality assurance and plant safety can influence your return on investment analysis.
Originally published in Fluid | November 2021
A proper replacement schedule for industrial hoses is an overriding concern for plant managers and engineers, since replacing hoses too early can incur unnecessary costs, but replacing them too late risks failures. Alice Chin walks through a step-by-step strategy that can be used to prepare an appropriate preventive hose maintenance plan.
Originally published in HydrogenFuelNews.com | October 2021
Fittings in hydrogen applications, particularly those that connect the most critical parts of high-pressure hydrogen fuel systems, must be capable of delivering high levels of performance and reliability. Chuck Hayes and Chuck Erml discuss what those fitting options look like in comparison to traditional cone and thread fittings and highlight specific design characteristics that make the new options ideal for hydrogen applications.
Originally published in Industria Quimica | October 2021
Fluid system operators are tasked with maximizing value from their systems to enhance plant and refinery operations. Yet, many common inefficiencies threaten that mission. Michael Mohlenkamp reviews some common assemblies that require expert attention from assemblers, including grab sampling panels, seal support systems, and gas distribution panels.
Originally published in SMT Today | October/November 2021
A couple considerations are necessary when building a new semiconductor fabrication facility (fab), including how fast the fab can come to market and how to contain costs. Masroor Malik discusses five ways taking a careful approach to designing and installing fluid systems can contribute to a more profitable fab.
Announcing the 2021 P.I. Process Instrumentation Innovation Awards Winner and Honorable Mentions - WINNER: Swagelok Gas Distribution Program
Originally published in PIProcessInstrumentation.com | October 2021
P.I. Process Instrumentation’s annual Innovation Awards program has recognized the latest solutions in fluid and gas handling applications for more than 20 years. Read about how the Swagelok Gas Distribution Program earned top honors with the 2021 Innovation Award.
Originally published in Petroleum Technology Quarterly | Revamps (October) 2021
Whenever there’s a plant turnaround, chemical plants and refineries must consider all the nuances involved before undertaking one and it’s never a simple task. Scott Nunnery and Nathan Bradley share tips on how to achieve effective installation of fluid system components during this type of event.
Originally published in Chemie Technik | September 2021
No matter how a gas distribution system was built, there are likely ways to reduce inefficiencies that could lead to a lower total cost of operation and a safer environment for workers. Jon Kestner reviews how to identify common challenges in gas distribution systems and offers ways they can be addressed.
Originally published in Plant Engineering | September 2021
Ensuring a safe, continuous supply of primary and specialty gases to support critical processes is important to many laboratories, test centers and industrial sites. Karim Mahraz reviews advice for improving the safety and efficiency of gas distribution systems.
Originally published in oilgas | July/August 2021
As research into hydrogen fuel cell vehicles intensifies, it is critical to acknowledge the challenge of developing safe, reliable fuel cells — a challenge presented by hydrogen itself. Chuck Hayes and Chuck Erml review how having fittings that offer excellent seal tightness, grip strength, and ease of installation can enhance leak-tight performance and safety for hydrogen fluid systems used on these vehicles.
Originally published in Process Industry Informer | July/August 2021
A maintenance technician’s job is that much tougher when clusters of hoses and valves within an industrial fluid system are not labelled, requiring careful reviews of schematics to identify what component does what. Jon Kestner shares how a robust tagging system for hoses and valves throughout a facility’s fluid systems can help the facility simplify maintenance and minimize system downtime.
Originally published in P.I. Process Instrumentation | August 17, 2021
Safety and accuracy are top priorities when measuring pressure, flow, or level within a process stream. Chuck Erml offers tips to help enhance the accuracy of final measurements, while also boosting safety.
Originally published in Process Engineering | August 3, 2021
Mechanical seals are critical for safe operation in refineries and chemical plants. Sean Hunsicker shares a variety of best practices that will help ensure their proper operation.
Originally published in Hydrocarbon Processing | August 2021
Unmitigated fugitive emissions can be detrimental to a facility's bottom line, as well as the environment. Sean Hunsicker reviews methods for reducing fugitive emissions by instituting an enhanced leak detection and repair program (LDAR) and installing low emission (Low-E) valves.
Originally published in IEN | July 1, 2021
It is critical to optimize the performance of industrial fluid systems to help ensure the safety of plant workers and technicians, as well as the quality of the end product. Mike Frost provides a handy checklist for reviewing the most important parts of fluid systems to help enhance both safety and quality.
Originally published in Fluid Handling Pro | June 14, 2021
Without the right valve for a specific application, fluid systems may perform improperly or poorly, face increased downtime, and encounter avoidable safety risks. To make the optimal valve choice, Swagelok recommends the STAMPED method, which accounts for Size, Temperature, Application, Media, Pressure, Ends (or fittings), and Delivery. This article details how careful consideration of each variable will help you make the right valve selection.
New platform upgrades to Swagelok.com are providing enhanced e-commerce functionality and a more user-friendly design, making it easier for customers to search for, navigate, filter, and purchase products.
Originally published in Industrial Process Products & Technology | June 2021
Getting a proper representative grab sample and maintaining its condition while it travels to a lab depends on a variety of best practices. Stacey Phillips reviews several tips to help designers, installers, and operators improve the overall quality of samples collected and sent to laboratories for testing.
Originally published in cav (Prozesstechnik für die Chemieindustrie)| June 2021
Many gas distribution systems are being left undermaintained and vulnerable to inefficiencies due to a lack of sufficient internal resources to maintain them. This neglect may lead to inefficient gas bottle usage or undetected leaks. Karim Mahraz helps readers uncover savings opportunities and achieve gas distribution goals through standardized, highly configurable gas delivery solutions in this German-language article.
Originally published in Energy Newspaper | May 12, 2021
Fluid systems transporting high-pressure, high-temperature fluids and gases must be properly designed, calibrated, and operated to reduce risks. Swagelok Korea provides important tips for fluid system engineers and technicians to help them reduce risks. In addition, the newly established Gwangmyeong office of Swagelok Korea is featured. The office features a solutions center where high-purity and general industrial fluid systems are assembled, a training center where regular training is conducted and skills are practiced, and a service center that specializes in supporting Swagelok orbital welding machines.
Originally published in Plant Services | April 26, 2021
The wrong valve choices for industrial fluid and instrumentation systems can lead to poorer performance, potential safety risks, and increased downtime to resolve issues. Joe Bush offers advice for navigating the many varieties of valves available to choose the one best suited to the application.
Originally published in P.I. Process Instrumentation | March 2021
Hose core tube materials can make or break an application, providing long service lives or creating system problems. Doug Nordstrom helps readers choose hoses wisely by reviewing the pros and cons of various hose core tube material options and constructions.
Originally published in Chemie Technik | March 2021
The close collaboration between Swagelok and INEOS has contributed extensively to the safe operation of INEOS’s petrochemical facility in Cologne, Germany. Vera Weski and Andreas Growe describe how Swagelok’s trusted reliability helps INEOS ensure petrochemical safety in this German-language article.
Originally published in Process & Control | February 2021
Selecting the optimal valves for industrial fluid systems and sampling systems requires careful consideration. Joe Bush details how to apply the practical STAMPED method to select the valves most suited to particular applications.
Originally published in CONTROL | January 2021
Each year, readers of CONTROL write in votes for their preferred suppliers in more than 80 process control and instrumentation technology categories. As a reliable and well-known supplier to the processing and control industries, Swagelok earned the top slot in the 2021 Readers’ Choice Awards “Instrument Fittings” category.
Originally published in Chemical Processing | February 2021
Mechanical seal support systems serve a critical role in the proper functioning of seal and pump systems, so maintaining their integrity is paramount. Sean Hunsicker reviews some best practices based on API 682 guidelines that can help plants make their mechanical seal support systems last longer, work better, and maintain long-term safety.
Originally published in Plant Engineering | February 2021
A plant turnaround is certain to involve inherent complexity – likely with hundreds of technicians from multiple vendors all working on maintenance, revamping, and renewal projects at once. It can be a major challenge, and a poorly managed turnaround can be costly. Lawrence Crynes details best practices plant or refinery owners and operators can follow to manage plant turnarounds more effectively, saving significant time and money in the process.
Steve Sparkes, Vice President, Asia-Pacific interview: “Swagelok is an expert in providing fluid system solutions” (in Korean)
Originally published in Korea Gas Newspaper | January 8, 2021
Steve Sparkes, Vice President of Swagelok Asia-Pacific, spoke to Korea Gas Newspaper to discuss Swagelok’s products and solutions and how they meet customer needs in the Asia-Pacific region. He also describes Swagelok’s presence in the Korea market through the newly-relocated and renovated Swagelok Korea sales and service center.
Originally published in Processing | December 2020
The Swagelok® GB series ball valve won a 2020 Processing Breakthrough Products Award for being an innovative technology solution that delivers signi¬ficant improvements to the process industries. The new full-bore, bidirectional flow-capable valve provides high flow rates while simplifying installation, minimizing rework requirements, and delivering reliable shutoff performance for safe, efficient operation.
Originally published in Plant Engineering | December 2020
Plant Engineering named Swagelok its 2020 Top Plant for best practices related to safety, commitment to training, workforce development and digital transformation. This feature describes how the company’s focus on these values, as well as its forward-leaning response to the Coronavirus, has enabled success.
Originally published in Process Engineering | November/December 2020
A pressure gauge not functioning accurately may lead to lower quality system output due to the loss of valid data and the resulting effects of too much or too little system pressure. Dave Ross provides five tips for assessing the health of pressure gauges in this feature article.
Originally published in Chemical Processing | December 11, 2020
The new Swagelok gas distribution program offers a complete suite of services and fully engineered subsystems designed to help enhance safety and increase the uptime of gas distribution systems in industrial facilities.
Originally published in Quimica | October, 2020
For grab sampling activities to provide a clear picture of the true condition of materials flowing through process streams, samples must be representative. In addition, the process must be safe for operators. Karim Mahraz provides eight tips to help operators enhance system accuracy and safety when conducting grab sampling.
Originally published in Canadian Process Equipment & Control News (CPECN) | December 2020
In today’s industrial environment, keeping fluid system inefficiencies in check can be more difficult than ever before. For example, maintenance and instrumentation technicians are in short supply. Yet, their roles are as important as ever. Michael Mohlenkamp describes how plants can rely on fluid system fabrication services from third-party suppliers to help those facilities alleviate their internal resource constraints.
Originally published in Rubber & Plastics News | November 16, 2020
Combating common fluid system leaks in tire facilities is a worthwhile process, as leaks of compressed air, steam and condensate, and hydraulic oil can cause massive losses. Jason Duncan explains how attention to identifying and fixing leaks can have a significant positive impact on their bottom lines.
Originally published in OEM Off-Highway | October 22, 2020
Hydrogen has emerged as a promising alternative fuel option, but careful consideration must be made in the design and materials selection of critical fuel system components. Chuck Hayes reviews tips for selecting and specifying hydrogen componentry to ensure the reliable operation of vehicles and infrastructure.
Originally published in Processing | October 2020
Pressure gauges are a critical part of any fluid system, and it is imperative that they remain in good working condition at all times. Dave Ross reviews some important tips for how to recognize the signs of a failing gauge, minimize risk to employees, and reduce costly downtime to make repairs.
Originally published in PROCESS Worldwide | October 19, 2020
Grab sampling is an important function in industrial fluid systems, but a few common problems can negatively impact efficiency, representativeness, and operator safety. Danny Van Den Burg reviews some best practices that can help to ensure the safe, efficient capture of representative samples.
Originally published in Pipeline & Gas Journal | July, 2020
The stakes are high for component performance in the natural gas pipeline industry, and fugitive emissions should be curbed wherever possible. In this case study, Lawrence Crynes reviews how HOERBIGER Engineering Services relies on specially designed fuel injector adapters from Swagelok that provide leak-tight connections to eliminate fugitive emission worries.
Originally published in Les Journal des Fluides | September 2020
In an analytical sampling system, the goal is to convey fluid from the process stream to an analyzer as efficiently as possible to avoid lengthy time delays between sampling and analysis. Achieving optimum efficiency is well within your reach by following the strategies Randy Rieken details for obtaining the desired flow in a sampling system in this French-language article.
Originally published in oilgas | September 2020
Critical, medium-pressure oil and gas applications have long relied on cone and thread fittings for safe and reliable fluid system performance. However, these fittings require careful, time-consuming installation at every connection point. As a welcome alternative, today’s newer compression fittings enable efficiencies with dramatically faster installations. Chuck Erml reviews the key differences between the two fitting types in this Spanish-language article.
Originally published in Silicon Semiconductor | Issue IV 2020
As the semiconductor industry continues to change rapidly, tool manufacturers must keep pace as well. Matt Ferraro describes how new ultrahigh purity (UHP) atomic layer deposition (ALD) valves – such as Swagelok’s ALD20 UHP valve – can enable total thermal immersibility and much higher flow rates than current valves to help optimize thin film processes.
Originally published in Plant Engineering | September, 2020
Grab sampling plays a key role in helping operators maintain quality control, regulatory compliance, and assurance that products are up to specification. Matt Dixon provides some practical tips to help operators maintain accuracy by creating good system designs and choosing the right sampling vessels.
Originally published in Processing | September, 2020
Following best practices for the design, installation, and operation of industrial fluid systems can help enhance safety plantwide. Mike Frost reviews some key safety tips, including simplifying system designs, selecting applicable components, and avoiding intermixing tubes and fittings from different manufacturers.
Fugitive Emissions - Being Proactive and Specifying Certified Low-Emissions Valves Prevents Costly Retrofit Headaches
Originally published in IPP&T | September, 2020
Fugitive emissions can negatively impact a company’s profitability if left unchecked. Selecting the right fluid system components is a necessity to keep such emissions under control. Sean Hunsicker reviews how plants can protect their facilities and bottom lines by using certified low-emissions (Low-E) valves.
Originally published in Korea Gas Newspaper | August 12, 2020
Industrial fluid systems are responsible for transporting high-pressure, high-temperature liquids and gases throughout plants in numerous industries. In this Korean-language article, Taeho Kim explains how critical it is to optimize the performance of these system for both the quality of your end product, and the safety of your plant workers and technicians.
Originally published in Plant Engineering | July 2020
Safe industrial fluid system maintenance requires isolating any line in which work will be performed. Without proper isolation, fluid inside a line – which is often pressurized – could pose significant risks to technicians. Joe Bush describes two approaches for designing a two-block valve system to enhance operator safety when changing a gauge or measurement device.
Originally published in Modern Chemical Industry (WeChat) | June 25, 2020
In this Chinese-language article, Swagelok is showcasing its commitment to growth in the Asia-Pacific region by investing in measures designed to help regional customers overcome business challenges and meet the pace of demand in a competitive marketplace. Recent investments have included the appointment of a vice president of the region, the dedication of a new regional office in Singapore, and an extensive expansion of the company’s manufacturing plant in Changshu, China.
Swagelok’s Safety Solutions on Industrial Fluid System to Promote the High-Quality Development of the Petrochemical Industry (in Chinese)
Originally published in International Pumps & Valve News for China (WeChat) | May 27, 2020
China’s petrochemical industry is increasingly focused on building safe and efficient fluid systems within their facilities. In this Chinese-language article, Swagelok summarizes seven tips to build safe systems, while maintaining the sustainability of the system.
Originally published in oilgas | May/June 2020
With chemical plants and refineries facing the looming threat of skilled workers nearing retirement, facility managers are concerned about the resulting skills gap and how to maintain operations. Ziad Bedran provides useful tips for how to shrink that gap via training that builds and reinforces essential fluid system skills in this Spanish-language article.
Originally published in Petroleum Technology Quarterly | Q3 2020
Various forms of corrosion threaten the integrity of fluid system components and tubing used on large offshore platforms. If not detected early, corrosion can lead to costly shutdowns, repairs, and even accidents. Gerhard Schiroky shares advice for identifying types of corrosion and how to select optimal materials of construction to combat them.
Originally published in BUSRide Maintenance | May/June 2020
With multiple tanks of high-pressure, flammable gas on board, safety is the top priority for hydrogen-powered buses and trucks navigating populated city streets. Gavin Pettifer reviews how Swagelok has helped Luxfer Gas Cylinders enhance the safety of its hydrogen fuel delivery systems, as well as its efficiency in fabricating those systems.
New Swagelok GB Series Ball Valve Brings Added Safety, Simplified Installation to High-Flow Applications
Originally published in Hydrocarbon Processing | June 2, 2020
Introducing the Swagelok® GB series ball valve - a new full-bore, bidirectional flow-capable valve engineered to provide high flow rates at a working pressure of 6000 psig (413 bar). The valve also simplifies installation, minimizes rework requirements, and delivers the reliable shutoff performance needed to keep workers safe and systems operating efficiently.
Originally published in Plant Services | June 2020
It is critically important that all systems responsible for containing and transporting process gases like hydrogen fluoride, hydrogen sulfide, and other harmful substances operate free of leaks to avoid the release of fugitive emissions. Ken Backus reviews how educated and empowered employees can help reduce fugitive emissions and drive improved refinery safety.
Originally published in E&P | June 2020
Ensuring repeatability and reliability in fluid system assemblies depends on following exacting manufacturing and material standards to produce quality components every time. Matthew Gallaugher describes how asset owners can realize better outcomes when they require that manufacturers take a standards approach to specifying materials and components.
Originally published in Hydrocarbon Processing | May 2020
Plants and refineries face many common inefficiencies that threaten the ability of fluid system operators to maximize value from their systems and enhance facility operations. Dwindling technical staffs are a major contributor to such inefficiencies. Bill Menz reviews how plants can save internal resources and enhance operations by working with reputable suppliers to provide fluid system assembly services.
Originally published in Semiconductor Digest | April/May 2020
ALD processes are requiring higher performance and precision as semiconductor manufacturers seek to reach new levels of innovation and productivity. Matt Ferraro explains how the next generation of ultrahigh-purity ALD valves — including Swagelok’s ALD20 UHP valve — are opening new opportunities for high-quality depositions without sacrificing process efficiency.
Originally published in Oil and Gas Facilities | April 23, 2020
When battling fluid system corrosion in marine oil and gas applications, material selection is your first line of defense. Brad Bollinger details how to recognize pitting and crevice corrosion, as well as how to optimize tubing material selections for such applications based on the material’s PREN value.
Originally published in Plant Engineering | April 13, 2020
Deemed an essential business during the coronavirus (COVID-19) crisis, Swagelok has taken a number of steps to continue operations and serve critical industries. Plant Engineering describes Swagelok’s highly deliberative approach that relies on an abundance of caution, key documents, and individual responsibility.
Plant Engineering content manager Kevin Parker discusses the steps Swagelok has taken to continue operations and serve critical industries during the coronavirus (COVID-19) crisis.
Originally published in Hydrocarbon Processing | April 6, 2020
Swagelok is donating up to 20,000 N95 respirator masks to local emergency medical services and hospital systems in Ohio and Pennsylvania to support the fight against the coronavirus (COVID-19). Hydrocarbon Processing provides details about the donation to help healthcare workers on the frontlines.
Originally published in PROCESS | March 2020
Water hammer is a common yet often unidentified problem that poses a significant threat to any liquid sampling system. Karim Mahraz discusses tips on how to evaluate the variables that cause water hammer and how to adjust them to minimize the phenomenon in this German-language article.
Originally published in Process Engineering | January / February 2020
Maximizing fluid system efficiency is a must to boost productivity, as well as reduce costs and downtime. Stacey Phillips covers strategies for improving fluid system efficiencies, including prioritizing leaks, optimizing components and inventory, and simplifying design and assembly practices.
Originally published in Fluid Handling International | January / February 2020
While a plant should never compromise safety, it’s also critical to keep costs down while obtaining the longest life possible from components. Cory Cottrill describes five key strategies to extend fluid system maintenance intervals, reduce costs and enhance safety in the process.
Originally published in Processing | January / February 2020
It is often hard to know when a process instrumentation line is not performing well, especially if one’s attention is focused solely on the transmitter. Chuck Erml provides advice for solving problems within process instrumentation lines to enhance the accuracy of final measurements.
Originally published in Offshore | December 2019 / January 2020
A change in the fittings technology used for medium-pressure fluid system applications can yield major life cycle cost savings for offshore topside assets. Chuck Erml describes how switching from traditional cone and thread fittings to FK series compression fittings allows assemblers to install fittings about five times faster, while virtually eliminating rework needs during hydrotesting and acceptance testing.
Originally published in Chemical Engineering | January 2020
To achieve timely, accurate analytical sampling system measurements, system designers must refine multiple variables related to the system layout and performance. Randy Rieken reviews several interrelated variables and walks through a comprehensive design example to help designers succeed.
Originally published in Process Industry Informer | November/December 2019
Grab sampling for offline process fluid analyses isn’t necessarily as easy as grab and go. First, the sample must be representative. Second, the process must be safe. Karim Mahraz covers eight guidelines for enhancing system accuracy and safety when conducting grab sampling.
Originally published in Canadian Process Equipment & Control News | December 2019
A single fluid line’s interior pressure or flow can represent a critical hazard when technicians need to change a gauge or measurement device. Joe Bush provides tips for isolating the fluid system using two different double block valve configurations to enhance operator safety.
Originally published in Industrial Process Products & Technology (IPP&T) | November 2019
A regulator requires careful design, installation, and ongoing maintenance to maintain steady pressure in a fluid system over the long term. Jon Kestner covers a five-step troubleshooting to help operators extend regulator lives and realize better system performance.
Originally published on MachineDesign.com | November 21, 2019
The second of a three-part series: Selecting the proper hoses for carrying fluids and gases is critical for increasing uptime, safety, and cost-effectiveness. The wrong hoses can lead to unnecessary downtime, increased risks, and lower profits. Bill Menz reviews the most common hose materials, what they are best suited for, and how to minimize costs associated with hoses.
Originally published in Plant Engineering | November 2019
Fluid system leaks are common throughout most industrial plants and represent increased operating costs at best and potential safety issues at worst. Stacey Phillips describes how to avoid common causes and costs of fluid system leaks plantwide to optimize operations.
Originally published on MachineDesign.com | November 18, 2019
Industrial hoses are a critical component in helping plants reduce downtime and enhance safety. Bill Menz details four simple ways to help designers keep plants running and minimize potentially dangerous situations involving hoses.
Sampling System Design - Correct Probe Orientation is a Critical Consideration in the Design of a Sampling System
Originally published in Petroleum Technology Quarterly | Q4 2019
Probes are commonly used to extract samples from the middle of a process stream for analysis. They should be correctly oriented for reliable sampling. Randy Rieken reviews when and where to use each type of probe design and how to orient them to ensure timely, accurate sample analyses.
Originally published in Chemical Engineering | October 2019
In low-temperature conditions, the use of compatible sealing materials is essential for leak-tight operation and proper functionality of pressure-regulating devices. Jon Kestner reviews several aspects to consider when specifying such sealing materials.
Originally published in Chemical Production Plants Processes | October 2019
Grab sampling systems play a key role in quality and process controls, compliance with regulations, and verifying the performance of process analyzers. Matt Dixon provides a variety of tips to help plants realize more efficient and accurate grab sampling analyses.
Originally published in PCN Europe | September 2019
In analytical sampling systems, it can be advantageous to use a probe to extract process samples. However, sometimes a probe is not advisable. Randy Rieken explains how probes can help improve the representativeness of samples delivered to an analyzer – and when not to use them.
Originally published in Hydrocarbon Engineering | September 2019
Chemical plants and refineries are facing a growing challenge of skilled workers nearing retirement and leaving an alarming skills gap in their wake. Andy Hitchcock frames the route to closing this gap and constructing a well-trained team in three steps.
Originally published in Flow Control | August 2019
Well-designed multistream sampling systems should prevent cross-stream contamination, ensure fast responses and minimize flow upset. Randy Rieken discusses how to achieve better sample isolation and enhanced analyzer results with optimized designs for process stream switching systems.
Originally published in Gas Processing & LNG | July/August 2019
Numerous variables can affect analyzer measurement accuracy when sampling gases, with improper sample line temperature control being the most common culprit of incorrect measurements. Randy Rieken reviews how to maintain the required temperature for gas samples to enhance analyzer accuracy.
Originally published in Processing | July 2019
Proactive industrial hose maintenance plans can help operators prevent avoidable downtime and costly replacements by identifying issues before they become major headaches. Alice Chin details steps for developing such a plan to optimize costs.
Originally published in Canadian Process Equipment & Control News | June 2019
Installing a process analyzer in a sampling system is a sizable investment that often requires solid financial justification. Karim Mahraz reviews how to conduct a return on investment (ROI) analysis to ensure a process analyzer is making a positive impact.
Originally published in IEN| June 2019
Transporting high-pressure, high-temperature fluids and gases can pose significant risk if systems are not properly designed, calibrated, and operated. Ken Backus offers key tips every fluid system engineer and technician should know to reduce risks.
Originally published in Canadian Process Equipment & Control News | April 2019
When developing a steam heat exchanger or steam heat tracing system, designers must consider every element of the system before finalizing its design to avoid premature failure or under performance. Alex Chu provides several best practices for enhancing the life and performance of steam system components.
Originally published in PROCESS Worldwide | March 2019
Water hammer can be puzzling, disruptive, and damaging for any operator. Karim Mahraz outlines how to evaluate and minimize water hammer in a liquid sampling system.
Originally published in Process & Control | February 2019
The location and orientation of the nozzle that supplies process samples to a sampling system are critical to ensure accurate and timely analytical measurements. Karim Mahraz details considerations to optimize nozzle placement and orientation.
Originally published in Fluid Handling International | February 2019
A regulator’s main purpose is to maintain steady pressure in a fluid system application – preferably across the application’s full range of anticipated flow rates. To help confirm that your regulator is sized appropriately, Jon Kestner outlines how to read a regulator flow curve.
Originally published in IEN | November 2018
When replacing a single fluid system component in your plant, the cost of that component extends far beyond its price tag. Cory Cottrill outlines additional cost factors associated with your components.
Originally published in Flow Control | September 2018
The pressure control device is often misunderstood. Swagelok’s market manager, Randy Rieken, details how to set up a back-pressure regulator in an analytical sampling system in Flow Control Magazine.
Originally published in Plant Engineering | September 2018
When performing sample analysis in analytical sampling system, operators may need to precondition the sample first. Swagelok’s market manager, Randy Rieken, details the differences between field station module and fast-loop module options.